- Home
- Documents
*Effect of pavement stiffness on the shape of deflection .Effect of Pavement Stiffness on the Shape*

prev

next

out of 16

View

218Download

0

Embed Size (px)

DOI: 10.1515/aslh-2015-0003 Acta Silv. Lign. Hung., Vol. 11, Nr. 1 (2015) 3954

Effect of Pavement Stiffness on the

Shape of Deflection Bowl

Pter PRIMUSZa*

Jzsef PTERFALVIa Gergely MARK

b Csaba TTH

b

a Institute of Geomatics and Civil Engineering, Faculty of Forestry, University of West Hungary,

Sopron, Hungary b Department of Highway and Railway Engineering, Budapest University of Technology and Economics,

Budapest, Hungary

Abstract The paper introduces a new method for calculating the elastic moduli of pavement layers.

The method requires only two input parameters: the thickness of the upper bound layer and the

Falling Weight Deflectometer (FWD) or Improved Benkelman Beam Apparatus (IBBA) measurement

data. The authors developed a continuously differentiable regression function, which can be applied to

describe the shape of the deflection bowl. Additional parameters of the deflection bowl (e.g. radius of

curvature, position of inflexion point) can be calculated based on the regression function. FWD

measurements were simulated running the BISAR (Bitumen Stress Analysis in Roads) software on

different pavement variations. Outputs of the simulations were further processed with self-developed

software. As a result, a series of diagrams were elaborated, by which the elastic moduli of the

pavement layers can be determined.

Stiffness / pavement layers / elastic moduli / deflection bowl / BISAR

Kivonat A plyaszerkezet merevsgnek hatsa a behajlsi tekn alakjra. tplyaszerkezetek esetben a megfelel rehabilitcis eljrs kivlasztsa igen nagy gazdasgi jelentsggel br. Ezrt a

szerkezetek llapotnak megfelel ismerete nlkli dntshozatal igen kltsges lehet. Emiatt

klnsen fontos, hogy az FWD (Falling Weight Deflectometer) vagy IBBA (Improved Benkelman

Beam Apparatus) eszkzzel mrt elmozdulsok elemzsvel olyan tbbletinformcihoz jussunk, ami

a dntst megknnyti a gyakorl mrnk szmra. Az FWD vagy IBBA eszkzzel mrt deformcis

vonalra illesztett fggvnybl levezetett grbleti sugr (R0) s a burkolatvastagsg (h) ismeretben a

kttt rtegek aljn jelentkez megnylsokat jl lehet becslni. A BISAR (Bitumen Stress Analysis

in Roads) programmal vgzett szmtsok statisztikai elemzse pedig azt mutatja, hogy a D0 (kzponti

behajls) s R0 (grbleti sugr) paramterek ismeretben lehetsg nylik a kttt s szemcss rtegek

modulusnak visszaszmolsra.

Merevsg / plyaszerkezet rtegek / rugalmassgi modulus / behajlsi tekn / BISAR

* Corresponding author: primusz.peter@emk.nyme.hu; H-9400 SOPRON, Bajcsy-Zs. u. 4

40 Primusz, P. et al.

Acta Silv. Lign. Hung. 11 (1), 2015

INTRODUCTION

Forest roads with asphalt pavement represent the basis of the forest road networks in

Hungary. Properly maintained asphalt pavements offer a high level of service. While traffic

load of forest road networks have grown, expenses for their maintenance remained lower than

required in the last three decades. As a result, these roads are in poor condition, generally.

Renovation projects demand the knowledge of the roads bearing capacity. The term bearing

capacity, although widely used at pavement management projects, is hard to define. In fact,

direct measurement of bearing capacity is impossible. Instead, one can measure the deflection

caused by a known load, and calculate the bearing capacity afterwards.

The traffic transfers its loads to road pavements through the tyres of the vehicles. Due to

this, shearing stresses originate from vertical loads (pressing, beating, shaking, bending etc.)

and horizontal stresses (braking, accelerating, wearing) (Kosztka 1978, 1986). These stresses

affect each pavement layer differently, such as the elastic and plastic (permanent)

deformation, the break and the structural realignment (Boromisza 1976). All these structural

changes appear on the surface of the pavement as deformations, and the so-called deflection

bowl or deformation surface forms.

To measure the evolving deformations several methods have been elaborated. Currently the

measuring procedures based on absorbed oscillation are widely used. These are called Falling

Weight Deflectometers, FWD. These deflectometers, operating with impulses, often drop a given

weight from a given height onto a disc with anti-shock using the potential energy then they

record the evolving displacements (Kosztka et. al. 2008). Researchers of the Institute of

Geomatics and Civil Engineering at the University of West Hungary developed a new instrument

to measure the full deflection bowl with the Benkelman beam (Mark et. al. 2013). The

development was based on the Benkelman beam, extending its properties with automated data

logging and the ability to measure multiple points of the deflection bowl. The Improved

Benkelman Beam Apparatus (IBBA) continuously measures the vertical displacement of one

point on the surface of the pavement, together with the horizontal position of the truck (Figure 1).

Figure 1. Falling Weight Deflectometer (left) and

Improved Benkelman Beam Apparatus (right) in action. The deflection bowl recorded during the test provides much more information about the

current state of the pavement structure than the central deflection in itself. Therefore we can

define its bearing capacity, remaining lifetime, and the thickness of the needed strengthening

layer more precisely. Choosing the applicable rehabilitation procedure in the case of a given

pavement structure has a really great economic significance. Without appropriately knowing

the condition of the pavement,decisions could become very expensive. This is why it is so

important to gain additional information by analysing the deflections, which makes it easier

for the practising engineers to make decisions. We started our work with this approach, and

summarized our results in this paper.

Effect of pavement stiffness on the shape of deflection bowl 41

Acta Silv. Lign. Hung. 11 (1), 2015

1 MATERIAL AND METHOD

1.1 Estimating the deflection bowl with functions

When deflection is measured to define the bearing capacity, displacements are measured and

recorded only in certain distances from the load. This makes it necessary to fit functions onto

the discrete measurement points to get the complete plot of all the evolved deflections. It is

practical to apply functions describing the deflection bowl, because this way the geometrical

attributes that are important regarding the stressed pavement can be defined with

comparatively easy calculations.

Because of the surface sinking caused by mining (e.g. tunnel building), functions were

already elaborated long time ago. Most authors (Aversin, Martos, Beyer, Bals etc.) suggested

functions similar to the Gaussian bell curve (Fazekas 1978). Suggestions can be found to

describe the deformation curve of pavements in Hothan and Schfers (2004) summary work.

Hossain (1991) used exponential function to estimate the deformation caused by external

load:

bxD x ae (1)

where x : distance from the centre of the load [m] and a, b : parameters.

On the basis of their examinations the effect of the upper and stiffer layers can be

experienced in the decrease of the a parameter, while the effect of the lower high-solidity

layers causes increasing b parameter value. The a and b parameters depend on the

strength of materials characteristic of the pavement. The exponential function is able to

estimate the FWD or IBBA measurements with high correlation, though it cannot reproduce

the natural shape of the deflection bowl. Therefore it is not suggested to use it despite the high

correlation coefficient.

Jendia (1995) tries to describe the whole deformation curve by substituting the

exponential function in the central range of the deformation line 0 x r with a hexic polynomial:

6 4

3 2

2

1 0 0bx

c x c x

D x c x c x r

ae x r

(2)

Jendia first defines a and b values of the unknown parameters. He specifies the

second derivatives equality at the joint of the functions, that is, the continuity of the curve.

Therefore, there are three constraints for the c3, c2, c1 and c0 parameter.

He creates the last independent variant iteratively by minimizing the difference between

the values measured on the second and third sensor of the FWD device and the calculated

deflections. The method of Jendia can reach only low equality with the data points in spite of

its high demand of calculation (Figure 2).

Grtz (2001) makes it possible to describe the deflection bowl with a single function:

2

21

a b

c

w w xD x

w x

. (3)

With the help of the suggested rational fractional function1 the three factors that describe

the whole bowl can be defined (Figure 2. Grtz (1)). The correspondence with the measured

results can be further increased if a fourth degree of the polynomial is used:

1 The rational fractional function is a mapping of the set of scalars, where we give the association with the quotient of two polynomials.

42 Primusz, P. et al.

Acta Silv. Lign. Hung. 11 (1), 2015

2 4

2 41

a b c

d e

w w x w xD x

w x w x

. (4)